- Six 4-1/2" meters: Two voltmeters, displays operating
voltage, 0-50 volts & displays stator output or additional
voltage reading, 0-25 volts.
Two ammeters, displays operating
output amperage, dual scale l0-0-150/30-0-300 & displays
field current 10-0-10.
One ripple voltage meter.
One diode trio condition meter.
- Variable speed control from 0-6000
RPM. Changes in RPM can be made in 5 seconds.
- Selector switch offers 6, 12,
or 24 volt operation. (32 volt is optional.)
- A and B field circuit.
- Field circuit protection-10 amp
fuse breaker, push to reset.
- No charge indicator light for
IC regulator alternator.
- Motor rotation, forward and
reverse, switch operated.
- Four fixed loads, 30-60-90-120
amps. Switch operated.
- Air vise.
- Tachometer.
- Heavy duty metal cabinet with
textured finish (Optional).
- Heavy duty cooling fan.
- Three step pulley: 3", 4",
and
serpentine.
- Fan belt and pulley guard.
- Twenty-seven most popular,
quick connect adapters with
convenient mounting rack.
- Heavy duty stand optional.
- Shipping weight: 350 lbs. with
stand: 50 lbs.
- Dimensions: 39-1/2" wide
x 31"
high X 48" deep; with
stand: 40"
wide x 58" high x 49"
deep.
|
Model K700V
| K700V: |
5 HP, single or 3 Phase motor. |
| K700DV: |
Same as K700V but with 5 digital meters. |
| K700SV: |
Same as K700V but with light duty, free running
starter testing capabilities. |
| K705: |
Same as K700V without variable speed. |
| K707V: |
7-1/2 HP single or 3 Phase with load capabilities
of 20-40/60-80/100-120.
Most special load requirements available
upon request. 32 volt standard. Heavy duty vise. Standard heavy-duty
stand. |
| K707DV: |
Same as K707V but with 5
digital meters. Standard
heavy-duty stand |
K-720D
Alternator Tester 20HP
- 4
Digital meters; 2 voltmeters displays operating voltage &
stator output additional voltage reading; 2 ammeters displays
operating output amperage and field current.
- One 4
½” diode trio condition meter.
- One
4 ½” ripple voltage meter.
- Bright
red indicator light displays ON or OFF mode.
- Selector
switch offers 12 or 24 volt operation.
- A and
B field circuit.
- Field
circuit protection 10 and 20 amp fuse breaker, push to reset.
- No
charge indicator light for IC regulator alternator.
- Motor
rotation forward and reverse, switch operated.
- 10
fixed loads. As customer request up to 250 Amps. Switch
operated.
- Manual
vise, heavy duty to accommodate any size alternator.
- Heavy-duty
metal cabinet with texture finishes.
- Two
10” cooling fans.
- Heavy
duty test stand.
- 30
most popular quick connects adapters.
- 20 Hp
motor 3Ph. 208-230/460 VAC.
- Dimensions:
40” wide x 58” high x 49” deep.
- Shipping
weight 550 lbs.
|
K-720DV
Alternator tester 20HP. Variable Speed.
- 4
Digital meters; 2 voltmeters displays operating voltage &
stator output additional voltage reading; 2 ammeters displays
operating output amperage and field current.
- One 4
½” diode trio condition meter.
- One 4
½” ripple voltage meter.
- R.P.M.
meter digital
- Bright
red indicator light displays ON or OFF mode.
- Selector
switch offers 12 or 24 volt operation.
- A and
B field circuit.
- Field
circuit protection 10 and 20 amp fuse breaker, push to reset.
- No
charge indicator light for IC regulator alternator.
- Motor
rotation CW or CCW, is reversed trough a power inverter, from
0-6000 RPM in 7 seconds. RPM could be modified as customer
request.
- 10
fixed loads. As customer request up to 250 Amps. Switch
operated.
- Manual
vise, heavy duty to accommodate any size alternator.
- Heavy-duty
metal cabinet with texture finishes.
- Two
10” cooling fans.
- Heavy
duty test stand.
- 30
most popular quick connects adapters.
- 20 Hp
motor 3Ph. 208-230/460 VAC.
- 20 Hp
inverter 208-230/460 VAC 3 Ph.
- Dimensions:
40” wide x 58” high x 49” deep.
- Shipping
weight 650 lbs.
|
|