300 Series
Alternator,
Generator &
Starter Tester

  • Two, 4-1/2" meters: Voltmeter, 0-18-0-36 for testing operating voltage. D.C. ammeter dual scale 10-0-100/120 amp for testing alternators and 30-300 amp for testing free running starters.

  • One 3" D.C. ammeter 10-0-10 for testing field current.

  • Duplicates the circuitry found in an automobile.

  • Tests 6-12-24 volt.

  • A or B circuit.

  • Motor reverse switch.

  • Heavy duty field rheostat, controls alternator and generator output.

  • Field circuit protection-10 amp fuse breaker, push to reset.

  • Indicator light for testing Delcotron and other units using diode trios

  • External voltmeter switch for checking alternator and regulator tabs.

  • Heavy duty mounting vise. Enables fast mounting and removal.

  • Three step pulley (3", 4", & serpentine) for low and high speed operation.

  • Variable load control. High 80 amps, low 40 amps.

  • Shipping weight: 200 lbs.

  • Dimensions: 24" wide x 22-1/2" high x 32" deep.

 

 
Model K351


Model K351V

Model K351V Specifications:

           For general specifications see the 300 Series model.

  • D.C. ammeter dual scale
    15-0-150 amp for testing alternators and 30-0-300 amp for testing free running starters.

  • R.P.M meter 0-7000 R.P.M

  • Electronic speed control.

  • Thre preset loads of 40, 80, and 120 amps.

  • Universal harness adapter.
     (with the 27 most commonly  used test leads.)

 

OTHER MODEL SPECIFICATIONS

K300: Designed for medium duty testing. Tests up to 100 amp alternators with no motor load down. 3 HP single Phase motor, 3500 RPM, 230 volt AC.
K351: Designed for heavy duty testing, small to large shops. 5 HP single Phase, 230 volt AC Tests alternators up to 120 amps.
K351D: Same as K351 but with digital meters.
K351V: Same as K351 but with variable speed.
K353: Same as K351 but with 5 HP, 5 HP, 3 Phase motor.
K373: Same as K350 but with 7.5 HP, 3 Phase motor.